Weaving a decorative cage from newspaper tubes. Cage made from newspaper tubes: master class step by step - fast and incredibly beautiful

When I started weaving, I had no idea how in demand this type of creativity was. Almost everything was planned for the house, for gifts (again, for the house, but not your own). And then I saw handbags, and then display cases displaying charming wickerwork.

Spring is coming, imagine several of these cages hanging on the tree where you are taking photos - beautiful!

Master class from a needlewoman from Minsk, whose work I am inspired by following her pages on Instagram and VKontakte.

“For a large cage like this one (height 60 cm), I built up the posts after lifting them from the bottom - I cut off the old ones, inserted new ones next to each other on the pva, and then covered the stumps next row. But usually I prefer to build up the racks at the bottom, it’s more reliable.

I begin to weave hanging rows

When weaving “hanging” rows, I glue the working tubes to the racks every 3-4 racks so that the rows remain at the same level and do not move down.

I decide in advance how many posts will form the entrance to the cage, and I don’t weave these posts, but turn around and weave in the opposite direction.

I cut the tubes and glue them. When making the entrance, these places will be covered with an arch made of flagellum.

at this stage I increased the racks - these were not long enough to form a dome. For larger cages like this one, I insert wire inside the posts.

I form a dome and tie it with jute twine

I left 6 ends of the entire tail, cut off the rest and coated them generously with PVA.

I divided the 6 ends into 2 parts (3 on each side), and connected the bundles to each other in the form of a ring

Now I wrap the ring with tubes according to the principle of weaving a twisted handle. You can make it simpler and just wrap the ring with one tube. It will look different.

I wrap the ends and twine with a tube, coating them with glue in some places.

I twist a flagellum from two tubes to form the entrance to the cell

I cut off the free posts at the bottom, use a thick knitting needle to make a hole in the weaving, insert the beginning of the flagellum there and glue it along the post

I form an arch from the flagellum, marking at the top the level at which I will cut off the free posts

I cut off the posts, and push the ends inside the flagellum and fix them with glue. After the glue has dried, I do the same on the other side. If you simply glue the flagellum to the top of the posts, the arch will stick out slightly forward.

For a large cage, like this one (height 60 cm), I built up the posts after lifting them from the bottom - I cut off the old ones, inserted new ones next to each other on the pva, and then covered the stumps in the next row. But usually I prefer to build up the racks at the bottom, it’s more reliable.”

A vintage birdcage or flower cage can decorate the interior of any room. Having studied the master class below on a cage made from newspaper tubes, even a person who is not familiar with the technique of weaving from newspaper tubes will be able to create such a beautiful decorative item.

This is one of many options for creating, seemingly from unnecessary materials, objects that are distinguished not only by their beauty, but also by their functionality. At first glance, it is not always possible to tell exactly what such a cage is made of.

Possibility of use

Objects and products made from tubes can be called a striking example of how useful things can be created from simple paper and newspapers. The weaving technology described in the presented master class can be used to create a variety of objects. It could be simple box for storage, basket, fruit vase, photo frames, watch frames. Some craftswomen even learned to make a variety of decorative crafts, paintings, toys and even original hats.

What we need:

1. Newspapers. They can be found in every home. To use it in weaving, the newspaper sheet must be whole, even, and free of bends. It is best if there are large format newspapers;
2. Magazines. From pages with bright colored drawings it is possible to get some pretty interesting tubes. But due to their high density and smoothness, they are difficult to use in work. It will be difficult to weave from them and a layer of paint will not adhere well to them;
3. Office paper. It is also quite dense, but it can be easily painted in the desired color;
4. Cardboard or any thick paper. In some products it will be required to create a base;
5. Glue. You can choose any one designed for working with paper. The main thing is to choose something that is not too liquid. It will be necessary for fastening the tube, gluing elements, and subsequent decoration;
6. Spoke. You can replace it with a long thin pencil or a wooden skewer. Will help to twist a thin and even tube;
7. Scissors;
8. Stationery knife;
9. Form. It is selected depending on the size and shape of the product being created. It is better if its surface is smooth;
10. Decor elements. You can use beads, rhinestones, lace, decorative stones, ribbons, flowers and more;
11. Stationery clips or clothespins. Will be required for intermediate fixation of elements;
12. Dye. It is better to choose acrylic, gouache or wood stain. They retain color and brightness well on paper;
13. Varnish for woodworking. Necessary for securing the weave in the finished product and giving it a beautiful look.

Related article: Anemones in a jug. Cross stitch patterns

To do this, you need to cut the newspaper into strips about 7 centimeters wide. Using a knitting needle, you need to twist the tube tightly, coating it with glue. After waiting a little for the glue to set, you can pull the knitting needle out of it.

If flat tubes are needed to weave a product, then round tubes can be easily turned into flat ones using an iron or a round object.

Basic work process

To weave a cage with your own hands, you first need to choose a shape the right size. To make the task easier, the bottom of the future cage can be cut out of thick paper or cardboard. Based on the size of the mold, you need to prepare two identical parts to fly around. In our case these will be circles. Eight tubes are glued to one of the circles. Of the seven, the base of the side surface will be created and one is needed for the braid. A second circle is placed on top, well coated with glue. At this moment it is better not to rush, wait a little until the glue dries. The bottom of the cage is ready!

Next, the selected shape is placed on the bottom. All seven tubes must be lifted up and secured along the edge of the mold using clamps or clothespins. Now you can start creating the side surface. Each of the vertical posts must be braided horizontally to the required height. It is better to braid the shape as tightly as possible, for greater strength of the product.

During the weaving process there will be a need to increase paper vine. We cut off the extra piece and glue it with inside. Having retreated the required distance, we begin to make the transverse bars of the cage. Their number and height of location depend only on the intended result. Now you can complete the top. It's simple, you just need to gather all the rods together and fasten them. If the vertical rods are not long enough, they can be extended to the required height. The cage made from newspaper tubes is ready!

Surely, many people are delighted with the vintage style. There is an aura of mystery and superiority about it, and some feel a continuous connection with previous generations. And how many mysteries, metaphors and even mystical meanings are endowed with cells? Now let's imagine it together? Do it yourself and you’ll get a magical combination! And our master class on creating a cage from the simplest newspaper tubes will come in handy for you. And the photo will serve as an excellent visual example.

Here are some examples of how you can design a cage, but human imagination has no limits, so you can play with styles, sizes and designs as much as your heart desires. But, in order to start creating, we need to know what materials we will need.

Making a cage from newspaper tubes: master class with description

• Paint the cage white and let dry.
• Take pink napkins and white, make roses out of them. You can choose the rose technique yourself. You will need to cover the bottom of the cage with them.
• Place a tube of newspaper horizontally inside the cage, making it like a perch, and place the bird on it.

Option two:

1. Artificial flowers.
2. Dye.

• Paint the cage the color you want.
• Attach flowers to the top.

In fact, there are a lot of options, it all depends on your imagination, capabilities and time you have. This can be from a large-scale and complex design to the simplest. If you like it, then this could even be a good option for earning extra money. Such a cell will always make you happy, even on the gloomiest day, because everything that is made with your own hands is valued much higher than what is made in a factory.

Video on the topic of the article

Visual information is better remembered and perceived, so here are a few video links that will be useful for making a cage from the simplest newspaper tubes:

The good thing about real craftsmen is that they can make a real masterpiece out of any unnecessary thing. Crafts made from newspaper tubes are proof of this. After all, it is very difficult to make a beautiful thing from simple newsprint. But it turns out that from this simple material different useful things are obtained. And the secret is that handicraft masters have learned to twist tubes from old newspapers, paint them in the desired color and weave various beautiful crafts and decorative items from them.

How to decorate the interior using products made from newspaper tubes

Quite often, products made from newspaper tubes are used as beautiful decor in the interior. As an example, you can make a decorative cage with your own hands from newspaper tubes. It is so easy to do that it is suitable even for novice crafters.

To work you will need:

• Newspapers;
• Stationery knife;
• Spoke;
• PVA glue.

Manufacturing process

• A sheet of newspaper is divided into 3 parts lengthwise and cut into strips using a stationery knife.
• Coat a thin strip with glue along the long side. Wind the paper tightly onto the knitting needle from the corner. Press the end well so that the tube does not unfold. Take out the knitting needle. The next tubes are made in the same way. The work will require a couple of dozen parts.
• The finished tubes are painted in desired color and lay them out on a sheet of paper until completely dry.
• After drying, take four pairs of tubes and lay them in a square with a side of 2.5 cm so that each pair intersects one at the top and the other at the bottom. An intersection should form in the middle of the tubes.
• Extend the tube by inserting one glued end into the other, twisting slightly.
• Bend the long tube in half and trace the farthest pair of squares. They cross, swap the upper and lower tubes and move them behind the next pair of posts. The tubes are crossed again, wrapped and circled around the next pair of racks. Lay the row as close to the sides of the square as possible. Weave similarly in a circle until the end of the row. Make sure that the square does not lose its correct shape.
• The second row is woven in the same way. Tubes are extended as needed.
• When two rows are already woven, begin to braid each rack of the pair separately.
• Next, 12 rows are woven without changes.
• Fix the tubes near the last post of the 12th row, fixing them with glue, and cut off the excess tails.
• All 16 racks are expanded.

• After this, bring the last rack of the 12th row under the next one on the left and bring it up. Continue this way until the end of the row.
• With an elongated tube folded in half, they grab any stand and weave the walls, crossing the tubes, as when weaving the bottom. Make 4 rows.
• They hide the tubes near the last rack and cut off the excess ones.
• Retreat 7 cm and continue weaving. It is necessary to ensure that the distance between the racks at the top and bottom remains the same. At the end of the row, the ends are secured and the excess is cut off.
• Bend the posts towards the center to make the dome of the cage. Take 2 adjacent tubes and, stepping back 4 cm from the last row, braid them together. Do this until the end of the row. You need to try to ensure that the dome narrows evenly.
• To prevent the weaving from unraveling, secure the row with a clothespin while the tubes are being extended.
• At the end of the second row, secure the tube around the stand with glue. The inner one is cut off from each pair of racks.
• Bend the remaining posts in a semicircle and glue the end of one into the base of the other opposite. There should be a vault. If the length is not enough, the stand is extended.
• To make a handle for the cage, take a tube and bend it into a ring. Make 2 turns between the pillars of the arch and connect it.

A basket of newspaper tubes is woven using the same principle. This weaving is especially relevant for Easter. The base of the basket is woven in the same way as the cage. But to simplify the work and to get a beautiful and even shape, use some kind of container. The depth and shape of the basket itself depends on the volume and depth of the container that will be braided with newspaper tubes. To simplify the task, you can use diagrams. They clearly show the step-by-step sequence of work.

How to paint newspaper tubes

To give the product the desired color, the tubes are painted before weaving. To paint colored tubes, a primer is used; it can be absolutely any kind. They also use a brush and a glass to stir the paint. Dyes are used along with the primer to give the tubes any color or shade.

To paint the tubes in wood shades, stain is used. If the stains are not water-based, they are diluted with a solvent. Finished products can also be dyed. The finished basket of newspaper tubes can be painted with a mixture of water, PVA glue and white acrylic paint.

Using various photos and video, you can create unusual versions of products from newspaper tubes for every taste.

Video on the topic of the article

Weaving from newspapers. Bird cage. Step-by-step master class.

Weaving from newspapers. Bird cage

For a large cage, like this one (height 60 cm), I built up the posts after lifting them from the bottom - I cut off the old ones, inserted new ones next to each other on the pva, and then covered the stumps in the next row. But usually I prefer to build up the racks at the bottom, it’s more reliable.

I begin to weave hanging rows

When weaving “hanging” rows, I glue the working tubes to the racks every 3-4 racks so that the rows remain at the same level and do not move down.

I decide in advance how many posts will form the entrance to the cage, and I don’t weave these posts, but turn around and weave in the opposite direction.

I cut the tubes and glue them. When making the entrance, these places will be covered with an arch made of flagellum.

at this stage I increased the racks - these were not long enough to form a dome. For larger cages like this one, I insert wire inside the posts.

I form a dome and tie it with jute twine

I left 6 ends of the entire tail, cut off the rest and coated them generously with PVA.

I divided the 6 ends into 2 parts (3 on each side), and connected the bundles to each other in the form of a ring

Now I wrap the ring with tubes according to the principle of weaving a twisted handle. You can make it simpler and just wrap the ring with one tube. It will look different.

I wrap the ends and twine with a tube, coating them with glue in some places.

I twist a flagellum from two tubes to form the entrance to the cell

I cut off the free posts at the bottom, use a thick knitting needle to make a hole in the weaving, insert the beginning of the flagellum there and glue it along the post

I form an arch from the flagellum, marking at the top the level at which I will cut off the free posts

I cut off the posts, and push the ends inside the flagellum and fix them with glue. After the glue has dried, I do the same on the other side. If you simply glue the flagellum to the top of the posts, the arch will stick out slightly forward.