How to make a night light with your own hands - a variety of examples with photo ideas. How to make a cool night light yourself

Modern nightlights are convenient and ergonomic light sources. They complement the interior of any room well and can become a real decor element. In the children's room, a night light will help the baby feel safe, and a hand-made lamp can also be presented as a handmade souvenir.

Benefits of a night light

The advantages of a homemade lamp can be considered the following points:

• creating a special pleasant atmosphere on the eve of sleep;
• the ability to navigate in the dark, while not waking family members with the main light;
• reducing children's fear of the dark;
• saving electricity;
• adding decorative elements to the overall interior;
• additional visual effects for the development of children's imagination.

Night light starry sky"

One of the most relevant and romantic models of a night lamp, to one degree or another, imitates an endless cluster of constellations in the night sky. Such a light source can be made independently from improvised materials. It does not need to be connected to the network, because a regular flashlight with little finger batteries is enough.

To create such a night light, you need a glass jar with a lid of any size, thick foil, scissors, an awl, a small flashlight and any surface that is not afraid of damage, such as a tray.

1. Draw a map of the starry sky on the foil. You can arrange celestial objects schematically or following the actual location of the stars. It all depends on your desires and degree of effort. If you are making a similar night light for a child, you can limit yourself to the image of the constellations Ursa Major and Ursa Minor.
2. Lay the sheet on a flat surface and poke holes with an awl. These will be the glowing stars.
3. Cut the foil so that its height matches the height of the jar. Roll the sheet into a tube and insert into a glass container.
4. Place a flashlight at the bottom of the jar and turn it on. The walls and ceiling are immediately illuminated by the beautiful glow of the night lamp.

There is another option to make a children's night light that imitates the night sky. It can be made from an ordinary tin can. Such a container should be cleaned, the label removed, painted in any pleasant color and a few holes made with an awl. Inside the jar, you need to put a flashlight, a garland or a lit candle. It is advisable to close the edges of the jar with a plastic lid so that none of the family members get hurt.

This version of the lamp can be an ideal romantic gift or bedroom decoration. To make a night light with your own hands, as an element of decor and a source of light, you need to purchase a lace fabric. It can have different colors and patterns, depending on your preferences. You will also need a dry and clean jar, scissors with thread, a flashlight with batteries.

1. Wrap the container with lace so that it does not protrude beyond the edges and does not overlap the edges. Remove excess parts.
2. Sew the borders of the lace to make a sleeve that matches the diameter of the jar. You can work on a sewing machine or by hand.
3. Place the sleeve on the jar, put a flashlight inside and screw on the lid.

From improvised means, it is quite possible to build a large home-made lamp that can decorate not only a nursery or bedroom, but the entire hall. To create such a miracle, you will need the original tin or plastic tea can. You also need scrapbooking paper, stationery, a paper cutter, acrylic paints, glue, sandpaper, masking tape. And since in this case we are making not just a night light, but a lamp, we need to prepare a lamp holder, an incandescent bulb itself, a power cord and a switch.

1. Cut out a piece of scrap paper that can completely wrap around the jar. Please note that the bottom of the tea bag will be the top of the lamp.
2. Remove the lid from the jar, lean it against a sheet of paper, circle it with a pencil and cut it out.
3. Connect the cut out template to the wrapped jar using masking tape. Draw a circle with a pencil.
4. Cut out the window according to your markings. Clean the edges with sandpaper.
5. Re-trace the oval template on the cardboard. Draw stripes inside it and cut out some of them.
6. From the inside, glue the cardboard to the jar.
7. On the outside, you can decorate the jar however you like, using paper, cardboard, acrylic thread, lace, etc.
8. At the back of the lamp, cut out a circle for the power cord. In the lid, you need to make a hole for the cartridge.
9. Assemble a lamp socket, a switch and an electrical plug into a circuit.
10. Place the cartridge in the jar, screw in the light bulb.
11. Assemble the lamp and check its operation by plugging it into a power outlet.

Night light for a child

When creating a lamp for a children's room at home, the most important thing is to show your imagination as much as possible. In addition, you can connect your baby to the creation of a night light and combine business with pleasure.

Prepare a glass ball or a spherical shade for the lamp. You will also need a large amount of tulle or tulle, glue and a few lanterns, and preferably a garland for the Christmas tree.

1. Cut out a large number of small circles from the fabric.
2. Take a dry and clean ceiling, collect circles of tulle or tulle in a "rose". Fix the fabric flower on the ceiling with glue, dropping quite a bit into the very middle of the rose. This way you will create a fluffy ball.
3. Place a flashlight inside the ceiling or. Show the result to the baby and watch his joyful reaction.

LED night light

To make an unusual and beautiful LED night light that can be placed in the nursery, you need to prepare a pair of transparent plastic tubes with different diameters. You will also need LEDs with the desired brightness and color gamut. Also prepare glass pebbles, wire, a larger cork, superglue, pliers and a board for LEDs.

1. Bend the ends of the LEDs with pliers.
2. Connect all LED bulbs with a piece of wire in a parallel circuit, observing the polarity.
3. Connect the ends of the wire to the board.
4. Check the working part of the night light, if the LEDs get very hot, add a resistor to the circuit.
5. Glue the tubes one inside the other. Pour decorative balls into the void.
6. Put the plug with LEDs on the tube. If the cork is larger in diameter than the tube, make a seal from a leather belt.
7. The LED night light is ready, you can turn it on.

Night lighting safety

As is clear from the above examples, there are a huge number of designer models of homemade lamps. There are different techniques for working with decorative materials to create a variety of lighting effects.

However, behind the beauty of the night light, you should not forget about the safety of yourself and your family. To this end, you should be especially careful when thinking about the power supply scheme for the light source.

Many home craftsmen believe that compact nightlights have minimal power and low voltage, which in itself should protect against malfunctions. This is not entirely true. A voltage of 12 volts for a halogen bulb or 3 volts for an LED power supply does not pose a threat to the human body. However, if a short circuit occurs, an electric arc will form at the point of contact. At the same moment, a current will pass through the wires, which can heat the insulation up to ignition. In this case, the power supply can operate in overload mode, but the shield will not react. That is why it is necessary to protect the wiring of such light sources with a fuse. After the electrical wiring at the output of the power supply is protected, you need to pay attention to the electrical safety of the board itself. It is enclosed in a reliable case, which is especially important for lamps in children's rooms, where children can try to disassemble the night light.

Many people associate this idea with the New Year, because it is at this time that there are a lot of light bulbs, lights and garlands around. To make such a night light you will need a minimum amount of materials. Just a beautiful glass jar and a garland.

You can also use additional materials to create a decor, but a minimalist night light is more relevant due to the trend of this style in fashion now. So, you need to put the garland in a jar and enjoy the beautiful sight. To make the lamp look more spectacular, you can put several jars of lights next to it.

Night light with infinity effect

Such lamps can be found in the store, but we will create them with our own hands. For this you will need:

• acrylic mirror,
• translucent glass panel,
• strip with LED inserts,
• aluminum strip,
• wooden board.

Production plan:

1. Make grooves in a block of wood for a mirror and glass panel using special tools.
2. The aluminum strip must be folded in the shape of a rectangle and fixed to the bar with bolts between the cuts made earlier.
3. Wrap the aluminum strip with LED tape using glue or wire.
4. Insert the mirror and glass panel into the recesses.

Night light - cloud

Such a lamp is an excellent decor in a nursery for a small child. You just need to take a lamp with a round, oval lampshade and glue it with cotton wool or other fluffiness in the form of a large cloud. The cloud should hang in the air, so you first need to thread a dense thread into the structure through the inside.

LED night light

Such a night light can be made from any material, because diode bulbs are completely safe (they do not heat up, unlike other light elements). This option is suitable for avid needlewomen and needlewomen. After all, there is where to roam the imagination. Anything, there would be a desire! The LED night light can be made wall-mounted and reverse wall-mounted.

The LED wall night light is made from a straight piece of dense material and the diode strip itself. The base material can be beer cardboard, a thin, not heavy wooden board, and so on. From this material, you need to cut out any shape (cats, flowers, butterflies ...) and attach an LED strip on the reverse side. The finished structure can be attached to the wall.

Night light that creates stars on the ceiling

Wherever this idea of ​​a night light did not flash: in films, on TV, and so on. No wonder. A night light that creates stars on your ceiling attracts people's attention and gives the room magic and coziness. Such a night light will not only create a cozy atmosphere in the room, but also give pleasant unforgettable emotions of magic and joy to the child. To make this night light you will need:

• Small glass jar with lid
• thick kitchen foil
• Felt pen, marker,
• Scissors and awl
• Board or any other hard surface

Manufacturing sequence:

• Transfer the stars to the foil using a marker,
• Move the foil to a hard surface and make holes with an awl, needle,
• Now move the sheet of foil into the jar, firmly attaching it to the walls. You should get a jar with an inner layer of foil walls.
• Put a lantern inside the jar, or you can put a garland, and close the jar with a lid. Turn the structure upside down.

paper night light

This version of the product is simple in execution, but requires great accuracy and perseverance. Paper is a pleasant material for needlework. You can make a beautiful night light out of it. To work, you will need thick paper, a clerical knife or an awl, and any object that emits light. You just need to create neat holes in the form of some kind of pattern and roll the paper into a cylinder, placing the "light" inside.

After looking at all kinds of do-it-yourself night lamps, we can conclude that making a beautiful practical room decor is a pleasant pastime for creative people.

Anyone can create their own night light if they wish. This may seem like a very time-consuming process, but for that, creating your own decor element will bring a lot of benefits, subsequently aesthetic pleasure and comfort.

Create beautiful masterpieces of home lighting and delight your loved ones!

Sometimes you just need a nightlight in a room. Of course, the easiest option is to buy it in a store, but often you want something unusual and original. Then simple master classes come to the rescue, which are easy to repeat and do not take much time.

At the same time, the craft will look beautiful, give the room an atmosphere of comfort and be combined with the overall interior. So, as you already understood, today we will talk about how to make a night light with your own hands.

Night light starry sky"

The first and very easy to manufacture is the “starry sky”. It got its name for its interesting appearance, which in the dark resembles the same sky. It can also be called a children's night light, although you can even use it in your own bedroom.

List of necessary things for its manufacture:

• Glass jar with a lid. It is better to take a cylindrical jar than a regular one.
• Thick foil.
• Small battery operated flashlight.
• And also an awl.

First you need to cut a piece of thick foil as high as a jar. Next, make holes in it, it is desirable that they are the same and evenly distributed. After we place a piece of foil in a jar and install a lantern. Then you can turn on the resulting craft and use it for its intended purpose.

There is also an easier way to make a DIY night light. This time we won't need foil, but we will need an awl. We take a cylindrical tin can, after removing the label and glue residue from it, and make holes with an awl.

Then we paint the jar in any color you like, it is best to do this with a can of paint. Next, put a battery-powered lantern or even a candle in the finished night light, but be careful, it's still fire.

LED night light

Now, let's talk about how to make a DIY LED night light. This master class will be more difficult than the previous one, but the result is worth it. Here is a list of required materials:

• A pair of transparent plastic tubes, which should be of different diameters.
• LEDs of the desired color, as well as brightness.
• The tube is large enough.
• Glass pebbles (decorative).
• Short wire.
• Hot glue (you can also use instant glue).
• Pliers.
• And of course the board to which we will connect the LEDs.

In order not to get confused, we have made step-by-step instructions for this master class:

The first step is to bend the ends of the prepared LEDs with pliers, you can see how to do this correctly in the photo.

The next step is to connect the already prepared LEDs with a piece of wire. Don't forget about polarity. Next, we attach the two resulting ends to the finished board.

After you need to check the operation of the LEDs and the entire structure as a whole, for this you need to turn on the night light, namely its executive part. In case the bulbs start to heat up, then add a resistor to the common circuit.

Now we take two transparent tubes. The smaller one must be placed in the middle of the larger one and carefully glued. In all voids, it is necessary to fill in decorative glass stones.

The final step is to take a cork, it should be with LEDs and put on a large tube. If the plug turned out to be larger than the diameter of the tube, then make a seal. For example, it can be made from a small piece of a strap.

Now the night light is ready and you can check its operation, there should be no malfunctions.

As you can see, if all the necessary materials are at hand, making such a night light is quite simple. And it looks very beautiful and original, and most importantly, it performs its main function - it illuminates the room at night.

A wooden night light also looks very interesting, but it is more difficult to make it.

So, today you learned how to make a night light called "starry sky" from a glass or tin can with your own hands, as well as how to make an interesting and original LED night light. I hope you chose your favorite idea and everything worked out for you.

DIY photo of nightlights

It is no secret that many people: adults, children, do not like or are simply afraid to sleep in the dark. Small table or wall lamps, called nightlights, often help get rid of this feeling.

The night light is not just a source of artificial lighting. It is an important element in decorating a bedroom.

He performs his main role in the evenings and at night. Hence its name. They are hardly used during the day.

In the evenings, when the sleep period begins and the large ceiling chandeliers are turned off, the night light becomes the dominant element.

The easiest way to buy a night lighting device is in a store. But if someone wants to ask how to make a night light with their own hands, it will turn out to be a very exciting activity.

Using a lot of various improvised materials, you can create an excellent exclusive, stylish night light. Its colors, external forms will depend entirely on the imagination of the home master.

What is the use of a nightlight

The night light is an excellent sedative for "night panties", as stated above.

But a small light bulb, usually located near the bed, has other useful functions:

• Create a pleasant environment before bed.
• Saving electricity, since the light bulb in a small night lamp consumes little electricity. Its power is several times less than that of a large ceiling chandelier.
• Acting as room interior decoration and so on.

Locations of nightlights

Before putting into practice the idea of ​​​​creating a night light, it is worth deciding on the method of its location. As already known, such a lamp is placed near the bed.

That is, it can be a beautiful battery-powered night light that is mounted on the wall, or a lamp standing on a night table or on the floor.

Examples of night lights

You can get ideas for creating a night lamp on the Internet. It's usually the first thing that comes to mind though. For information, you can use colorful manuals, a variety of literature intended for home needlework.

Independent work is always interesting, since it is quite interesting to create a similar design based on a photo of a night lamp made by oneself, posted on one of the Internet pages, but the idea of ​​\u200b\u200bcreating your own work looks much more attractive.

The Internet can be used to determine the main material that will be used in the work.

What materials are used in the work

Sometimes, in search of suitable materials for work, people visit construction markets and shops, but quite often everything that is needed can be found at home.

In this regard, it is interesting to consider improvised means that many craftsmen like to use in their work. Most of these tools are always at hand.

You can make a night light with your own hands from improvised materials using thin wooden boards and a sheet of acrylic, plexiglass, plastic bottles, and so on.

An example of making a night light using LED strip

To implement one interesting idea of ​​\u200b\u200bcreating a night light, you will need a small amount of boards, an acrylic sheet and an LED strip.

The process of making a night light with LEDs with your own hands is built as follows:

Take 2 boards of the same parameters with a small thickness. The thickness should allow easy cutting. The material is carefully sanded with sandpaper or a grinder to obtain a smooth surface.

A rectangle of the same size as the boards is cut out of an acrylic sheet.

On one of the boards a pattern is depicted or some kind of inscription is applied.

A jigsaw or a drill cuts a pattern or an inscription using the through method. The resulting holes will serve as areas through which the light flux from the night lamp will pass.

Each board and acrylic sheet is provided with four corner holes for fixing bolts. A hole is drilled in one of the empty boards for a cord attached to the LED strip.

A wide groove is cut into the acrylic sheet, exceeding the width that the LED strip has. The strip is laid in the lower part of the workpiece and fixed in the groove.

At the end, the night light is assembled by connecting the planks with bolts.

You can install such a lamp on the table, or fix it on the wall.

Other options for crafts are no less interesting in appearance and manufacturing technology.

Some represent a complex manufacturing process, such as a “flower” night light made in the form of a rose, and some are simple and quick, such as an LED garland placed in a glass jar.

DIY photo of nightlights

Today, you can purchase lighting fixtures for a wide variety of purposes for the home. Perhaps the most relevant lamp for a child's room is a night light.

Many children are afraid to sleep without light, and such lighting fixtures solve this problem very well, since they give little light, but at the same time it is quite enough for the child. At the same time, they consume a minimum of electricity. The popularity of hand-made products today is explained by the fact that many things needed in everyday life can be made independently at home. This article will tell you how to make a night light with your own hands from materials available in the house.

Theme for registration

Recently, the theme of the starry sky has been very popular for nightlights. At home, you can create an imitation of the starry sky in several ways. Making a night light with your own hands will be very profitable, because buying such products is quite expensive.
Thanks to this, you will get the following benefits:

• save money;
• create something with your own hands;
• please the child with a beautiful lamp;
• get creative.

Sky in the stars

In addition, such a lighting device can be installed not only in the children's room, but also in the bedroom. If in the first case it will create twilight, then in the bedroom - a romantic mood.

starry sky

Since it is the starry sky that is most popular today, we will consider several options for creating a night lamp of this type with our own hands.
Method number 1. Can lamp.
Note! The advantage of just such a lamp is that it does not need to be connected to the mains.
To make such a night light with your own hands, you will need materials that can be easily found in the house. The list of required materials includes:

• a glass jar with a lid;
• thick foil;
• tray. It can be replaced with any surface that does not scratch;
• flashlight.

Of the tools you will need:

• scissors;
• awl.

The basis of such a night light will be a small flashlight that runs on little finger batteries. To make a lamp, we perform the following manipulations:

• on a piece of foil we draw a schematic starry sky;
• put the sheet on a tray and make holes in it;

Note! The height of the sheet must necessarily correspond to the height of the jar.

• roll the foil into a tube and insert it into the jar;
• at the bottom of the jar we put the included flashlight and close the lamp with a lid.

The result of labor

Method number 2. Can lamp.
Such a lamp can be made even in the field. The set of materials for this is as follows:

• any tin can;
• nail / awl;
• dye. We choose the color according to our own taste;
• autonomous light bulb / flashlight.

The process of creating a night light is as follows:

• we clean and wash the jar from the remnants of the contents;
• we make holes in the jar with a nail or an awl. We make holes in a chaotic manner or according to the chosen scheme;
• paint the jar;
• we put the jar upside down, and inside we put an autonomous light bulb or flashlight.

As you can see, you can even make such a complex version of a lamp as a starry sky with your own hands at home. Both methods will allow you to create a beautiful projection of the starry sky on the ceiling and walls in the children's room.
But besides this, there are other types of lighting devices that can play the role of a night light. You can also make them yourself at home.

LEDs in a bottle

In addition to the models of lighting devices described above, a night light can be made from an ordinary can and LEDs. In this case, the creation process will be as simple as in the first two cases.
To assemble such a lamp you will need:

• Glass bottle. An excellent solution would be to use a bottle of a non-standard original shape;
• insulating tape;
• network cable with plug;
• LED garland for decorating the Christmas tree.

In addition, a very small set of tools is needed:

• wire cutters;
• drill and drill bits for drilling glass or ceramics.

To create a lamp from a bottle, follow the instructions below:

⦁ wash the bottle inside and out;

Note! The bottle must be dry!

• at the bottom of the bottle, almost at the very bottom, we drill a hole for the wire. We do this very carefully so as not to damage the bottle;

Bottle drilling

• after that, we insert the wire into the drilled hole and bring it out through the neck;
• we clean the ends of the wire and make a knot at a distance of 2-3 cm from its edge. This is done in order to prevent the cable from being pulled out of the bottle;
• cut off the plug at the garland and strip the ends of the wire;
• isolate the wires with electrical tape;
• the resulting garland is placed in a bottle. At the same time, the neck itself remains open.

Finished device

Here it is worth clarifying that in the process of operation such a night light will accumulate the products of the work of the LED garland at the bottom of the bottle. In addition, over time, the efficiency of the lamp will also decrease slightly. To minimize this effect, tie black strings to the garland before placing it in the bottle. Then "hang" a garland on them inside the bottle.

Night light and lace

A children's night light for a girl can be made using lace as a decorative element. Thus, you can give the glow of the lamp additional charm and charm.
In this case, for the manufacture of the device you will need:

• a little canvas with lace;
• threads;
• plastic or glass jar;
• battery operated flashlight.

Of the tools you will need only scissors and a needle.
The assembly instructions for such a lamp contain the following steps:

• wash and clean the jar from dirt and labels;
• we wrap it with lace;

Note! Lace should not protrude along the edges of the jar or overlap. This will degrade the light performance of the device. If the edges still come out, carefully trim them with scissors.

• sew the edges of the lace;
• put a flashlight on the bottom of the jar and close the lid.

You can make such a lamp very quickly. In reality, you will spend about 10 minutes on it. This night light will fit perfectly into the interior of a little princess.

Lamp with butterflies

Such a night light also belongs to the "romantic" ones, and therefore is more suitable for a girl's room. To make it, you need to have on hand:

• wire (about 50 cm);
• white paper (2 sheets);
• glass / plastic jar;
• flashlight;
• butterfly stencils.

A lamp with butterflies is made as follows:

• cut out several butterflies from white paper using stencils. We will need about 6-7 pieces;
• we fold the second sheet of paper into a tube (the jar should pass relatively freely into it) and beautifully decorate its edges. Curly cutting can be used;
• glue butterflies to the resulting tube (4-5 pieces). We place them in a chaotic order;

Note! Do not forget to leave two butterflies for later.

• then wrap the prepared jar with wire. You should get semicircles;
• on the bends of the wire we tie the remaining two butterflies;
• inside the previously obtained tube we place a jar, at the bottom of which there is an included flashlight.

The resulting lamp will be very beautiful and will be a great addition to any nursery interior for a girl.

Fatin in the studio!

Another way to make a night light is to use tulle. Here you will need a round cover, tulle, glue and a flashlight.

Tulle ball

The manufacture of the device is as follows:

• cut tulle into circles;
• we take the tulle and fold it in the form of a rose on the ceiling. Then we fix them with glue. You need to glue a tulle rose only in the middle;
• thus we make out the whole ball;
• put a flashlight inside. It can be replaced with a Christmas tree garland.

As a result, we will get a very beautiful and delicate nightlight.
Now you know that making a night light at home with your own hands is an easy, fun, interesting and creative activity. In just 5-10 minutes you will get a beautiful lamp that your child will really like and will fit perfectly into the interior of the nursery, and any other room.

Illumination of buildings with ground lamps - an overview of the most popular, installation