open
close

Homemade weapon. Homemade weapons for self-defense

Recently, representatives of law enforcement agencies found in a 66-year-old resident of the city of Dedovsk (Istra district of the Moscow region) an arsenal of weapons from the Great Patriotic War. The pensioner kept a variety of rarities - from a Walther P38 pistol to two machine guns, and they were bought, according to the owner, in ordinary markets. Illegal arsenals of this size are rare for policemen, much more often they come across all kinds of home-made weapons, which modern “kulibins” with a passion for firearms collect from improvised means. I present to your attention the most unusual handicraft "trunks" seized by the security forces.
Homemade pistols and shotgun

In March 2014, police officers from the Krutikhinsky district of the Altai Territory visited a 43-year-old local resident with a previous conviction and unemployed. The man who abused alcohol turned out to be very inquisitive: he studied old books and magazines and made weapons from them. Law enforcement officers confiscated an arsenal of three pistols and a rifle from a self-taught gunsmith, and opened a criminal case on the discovery of handicraft "trunks".




Atypical smoothbore firearm chambered for 5.6 mm cartridges


In October 2015, during a search of a 37-year-old man at the Kochkovatskaya station (Omsk region), police officers found a mysterious improvised device in his possession. The examination showed that the homemade product is suitable for firing cartridges of 5.6 mm caliber (“small ones”). The owner of the unusual find explained that he found it seven years ago in his brother's house. For many years, the crossbow lay idle, until finally its owner gathered in the forest for mushrooms, deciding at the same time to shoot from an unusual device. He came with him to the station, but the train did not wait, because he was detained by the police.

Homemade pistol chambered for 9 mm cartridges


In May 2015, in the village of Novy Rogachik (Volgograd Region), criminal investigation officers detained a 24-year-old local resident, who was seized a 9 mm pistol. As it turned out, the unemployed young man made it himself. The only cartridge for the seized pistol turned out to be homemade.

Homemade shooting device in the form of a pen

In January 2014, law enforcement agencies in Voronezh detained four men between the ages of 40 and 65 who were engaged in the manufacture and sale of weapons, ammunition and explosives. During searches in their apartment, law enforcement officers found 3,400 rounds of ammunition, about 400 grams of gunpowder, a sawn-off shotgun and three foreign revolvers. But the most exotic find was a homemade shooting device in the form of a pen.

Homemade multi-shot revolver chambered for 5.6 mm caliber


In November 2016, law enforcement officers confiscated a homemade revolver chambered for 5.6 mm from a 55-year-old resident of the village of Arkhangelskoye (Stavropol Territory). The owner of the homemade product was taken into custody, and upon the discovery of a revolver, the police opened a criminal case.

Homemade submachine gun


In September 2012, the police found a pensioner from the village of Convenient (Krasnodar Territory) with a whole arsenal of weapons: 171 cartridges for a pistol, machine gun, carbine and machine gun, two packs of gunpowder, a handicraft revolver and even a homemade submachine gun. Upon the discovery of the arsenal, a criminal case was initiated under Part 1 of Article 222 of the Criminal Code of the Russian Federation "Illegal acquisition, transfer, sale, storage, transportation or carrying of weapons, their main parts, ammunition."

Homemade pistol with a rifled barrel chambered for a small-caliber cartridge 5.6 mm


In July 2013, two 50-year-old residents of the city of Zima (Irkutsk region) were fishing on the banks of the Igna River and found a package containing a 16-gauge smoothbore gun and a home-made pistol with a rifled barrel chambered for a 5.6 mm small-caliber cartridge. The fishermen took the found weapons to the police and received a cash reward.

Improvised firearms


In April 2013, Irkutsk police reported that over 1,800 weapons had been destroyed in a steel furnace at the local Kuibyshev plant. Among these barrels were seized, voluntarily handed over, found and acted as material evidence in criminal cases. Very curious samples of home-made firearms also went into the furnace. The photo shows one of them.


One of the handicraft "trunks" destroyed in Irkutsk.

Homemade muzzle-loading firearms


On January 24, 2017, police officers of the Atyashevsky district of the Republic of Mordovia detained an unemployed local resident who, during a personal search, was found to have a suspicious device. The man explained that he made it to scare away stray dogs. True, the examination showed that this was a home-made muzzle-loading firearm, in connection with which a criminal case was opened against the unlucky gunsmith under article 222 of the Criminal Code of the Russian Federation “Illegal acquisition, transfer, sale, storage, transportation or carrying of weapons, their main parts, ammunition”.

firing device


In November 2015, the policemen of the Belogorsk district of Crimea, following a court decision, conducted a search in the household of a 55-year-old man. Law enforcement officers confiscated a homemade weapon from the owner of the dwelling, which he made from a knot of wood, similar to a pistol grip, and a metal tube. This miracle of engineering shot with shells up to 7.7 mm in diameter. The man explained that he needed the weapon to hunt nutria. On the fact of the discovery, law enforcement officers opened a criminal case under Article 222 of the Criminal Code of the Russian Federation (“Illegal acquisition, transfer, sale, storage, transportation or carrying of weapons, their main parts, ammunition”).

Single-barreled ramrod-loading pistol with a barrel diameter of 5.6 mm


In June 2015, in the city of Zlatoust (Chelyabinsk Region), as part of operational-search activities, police officers inspected the home of a 19-year-old local resident who had previously been repeatedly convicted. In his closet, law enforcement officers stumbled upon a mysterious object, which, as the examination showed, is a home-made single-barreled ramrod-loading pistol with a barrel diameter of 5.6 mm, firing home-made bullets. The owner of the unusual "barrel" claimed that he was keeping it for self-defense, which did not prevent the police from opening a criminal case against Kulibin.

"You can achieve more with a kind word and a gun than with just a kind word"

Al Capone

The legendary gangster had every reason to say so. After all, the possession of a weapon immediately makes its bearer more confident, resolute and, unfortunately, bolder. And if conditions are created in the country that the chance to run into the same carrier of a firearm is high, then involuntarily you begin to limit yourself and not bury yourself. But if either the privileged strata have weapons, or those who don’t give a damn about laws and regulations, then everything becomes much sadder. But you really want to have a real opportunity to repay the aggressor with the same coin ... Unfortunately, home-grown "kulibins" who, with their shit, sticks and pipes, are building something that by some miracle can shoot. This is a very unsightly, single-shot, often low-power weapon, from which you can only shoot yourself. And in order to cause real harm to the enemy, you need to try very hard. But this does not stop the people, so the police annually seize a huge amount homemade pistols who have been in business or not yet. Not far behind them are correctional officers, who are periodically fired at with such improvised weapons in order to escape. That is why homemade pistols and our today's photo selection will be devoted to.

Once alone with nature, you have to survive by getting food with the help of improvised means. It is good if you have a cold weapon or a hunting rifle with you. Once in a situation where there is neither one nor the other, you can make a weapon out of wood with your own hands.

Almost any weapon can be made from wood: a bow, a crossbow for hunting, a knife, a spear, a spear, a slingshot, an ax and even a gun. More details on how to make weapons from wood are discussed below.

Homemade wooden knife

The choice of material for the manufacture of weapons is a very important task.

  • Birch is a strong and unyielding material, it is better to make clubs from it.
  • Aspen, poplar and pine are softer, lend themselves well to various types of processing.
  • But the most suitable for homemade wood is oak. Oak wood is well processed, light in weight, durable, does not lose its characteristics over time.

Before making a blank, you need to choose a material that does not contain knots, rotten areas, curvature, heterogeneity of fibers, then dry it without exposure to direct sunlight. When the material is ready, a weapon blank is made.

Do-it-yourself wooden slingshot


Slingshot

The simplest weapon made of wood is a slingshot. With the help of this throwing weapon, you can hunt birds and small game, and for the manufacture you need a minimum of materials - a strong elastic band or tourniquet, and a branch with a fork (it is better to use hazel).

The fork is cut off from the main part of the trunk of the desired size, polished, a tourniquet is attached to both ends. For reliability, small cuts can be made at the ends of the slingshot so that the tourniquet does not slip off.

wooden club

A similarly simple weapon is a wooden club. The disadvantage of this projectile is that for its use it is necessary to keep a short distance, which can be very difficult during hunting. To make a club, you need to use a young tree, cut down closer to the root, where the wood is the most durable. The bark, all knots, are carefully removed from the surface of the workpiece, it is soaked for a day in water, then dried over a fire to blackness, which is then removed by grinding with sand and grass. This procedure must be done several times, resulting in a durable baton that does not rot.

DIY wooden knife


Wooden knives

An equally sophisticated homemade weapon is a wooden knife. It can be cut in one piece from a wooden block, or it can be made from two components. To do this, you need to put a sketch of the workpiece on wooden blocks, then cut it out with a hacksaw. After that, both parts are glued into a single whole. If the manufacture of a wooden knife is carried out in field conditions, then, as a rule, there is nothing to glue the components with. Therefore, it is cut from a single bar.

The blade is well sharpened and carefully polished, after which it must be burned on fire, giving it strength. If possible, you can make a lacquer coating of the knife, then it will not be afraid of moisture.

Wooden bow and crossbow

A bow or crossbow is an effective weapon in the forest, made of wood. There are many video examples of making a crossbow that describe the entire process in detail. First, the body of the crossbow is cut with a groove for the arrow. An arc will be attached to one end of the body, and a trigger mechanism will be made at one third of the other end. The arc is best made from several layers of plywood glued together, which are bent after drying. You can make it out of metal. At both ends of the arc of the crossbow, you need to make holes for attaching the bowstring. The arc is fastened to the body with a strong rope, if it is not at hand, with a wire. The bowstring is attached to the arc in such a way that it passes closely over the body, but does not touch it. The task of the trigger mechanism is to capture the bowstring and its sharp descent. The design of the mechanism can be made in the form of a wide arc or a complex system of hooks.

Arrows for crossbows are made of resilient wood, they are given a cylindrical shape, after which they are polished. The tip can be made of wood, metal or stone.

It is possible to manufacture not only “cold” weapons from wood. You can make something like a pistol or a gun, but you need to understand that it will not last long. The algorithm for making a pistol is simple: you need to make a frame from wood to which the barrel is attached, as well as a trigger mechanism with a striker, you can add a magazine. A metal tube is used as a barrel.


It is difficult to make a full-fledged pistol out of wood, but you can make a dart gun, which will become a full-fledged hunting projectile. In order to make it, you need to cut a cylinder from an empty aerosol can, into which a piston carved from wood is inserted. To ensure normal friction force, a rubber skirt is attached to the piston. Next, a stem is made using a large nail and a spring. Inside the wooden frame, you need to make a hole into which the cylinder with the piston is placed. The trigger mechanism is made similarly to a crossbow, in more detail the process of its installation can be found on the video. The barrel of the dart launcher must be made using a metal pipe, and for darts - nails.

Shooting toys can be easily bought at the store, but you can successfully make them yourself. On the pages of the Secret of the Master website, various designs of cool toys are considered, from the simplest to more complex ones, which, in addition to gaming and experimental purposes, can be of practical use, for example, in protecting crops from pests in the country.

How to make an office cannon with your own hands

A simple cannon design invented for "office wars". A projectile is a piece of paper crumpled into a ball or a light ball. The gun does not allow firing in a straight line, but it shoots great with a canopy, which allows you to bypass obstacles in the form of office partitions;). The gun is easily made with your own hands from a plastic bottle and office rubber bands. We look at the video and for details.

How to make a do-it-yourself rubber gun

Rubber gun

A simple wooden automatic three shot pistol. A handy pistol. It is cut out with a manual jigsaw from plywood, it is necessary to cut out only 4 parts. The gun fires rubber bands. With such a pistol, it is easy to organize a small airsoft gun in an apartment or on the street. We look at the drawings of the pistol stencil (link at the end of the blog). Carefully load a homemade pistol according to the instructions. For safety reasons, wear protective goggles.

How to make a vortex gun with your own hands

A wonderful weapon for children to play and experiment with. The cannon fires… with air, an invisible toroidal vortex escapes from the barrel, which moves in the direction of the shot for some distance. A safe thing for a child to play with weapons and remote "destruction" of toy buildings. Construction details are shown in the video and.

How to make a pneumatic machine gun with your own hands

If you have an air compressor with a receiver on the farm, then you have every opportunity to make a game console for the compressor. The weapon is adapted to the available ammunition - mountain ash and peas, and, accordingly, the machine guns are called mountain ash and pea guns. The design of a homemade machine gun is simple. The manual blowing is taken as the basis, which makes it easy to control the weapon. See the video for details of the production.

How to make a gas gun with your own hands

When repeating this design, strictly follow the safety rules. You build the gas gun at your own risk and assume ALL responsibility for the construction, use, consequences of using this device, as well as for any damage caused. The authors summarized the accumulated experience in the construction of potato cannons and tried to use ready-made elements in the design. In total, three types of guns of different calibers were designed.

Mini gun caliber 32 mm

The gun is made by hand in the form of a pistol and shoots small balls. A reliable piezo spark source will not pose a problem. Cannon pistol is used for target shooting competitions. Requires some experience when loading. See manufacturing details.

50 mm gas apple and potato gun

gas gun

This is a serious design in terms of sound and projectile. The main application is to imitate the sound of a shotgun shot to scare away birds. Reliable budget gun, but only with proper and gentle use. Strictly follow the safety rules and assembly recommendations. How to make an Apple Gun see

Hello, dear lovers of homemade weapons. By visiting this page, you probably expected to see information on making a homemade air rifle? I have to disappoint you - there is no such one here now. No, of course, it used to be, and we talked in detail about how you could make an air rifle with your own hands at home, but, as always, out of the blue, a notification from Roskomnadzor came, demanding to immediately delete all information on the manufacture of an air rifle from our site. Frankly, I was somewhat surprised by such a requirement. After all, pneumatics has nothing to do with the production of homemade firearms and explosives, which is prohibited in the Russian Federation. Although maybe I missed something? And now even homemade pneumatics fell under the category of prohibited information? It seems that the fight against terrorism has gone beyond the bounds of rationality, and is taking on the form of absurdity.

More recently, I had to remove information about a homemade flamethrower. Well, this can be explained somehow. After all, the combustible mixture used in a flamethrower can be completely bottled by making a battery of Molotov cocktails. I have not found any more reasons why it would be worth deleting this info. Okay, let it be that the flamethrower itself is a terrible weapon of a terrorist, which he will definitely use, having read my instructions, instead of, say, a homemade bomb, or a Kalashnikov assault rifle, so I deleted everything without further questions. But pneumatics! Who did she hurt? Honestly, it's easier to kill than from the air rifle design that was described on this site.

I expressed my bewilderment in a letter to Roskomnadzor, but have not yet received a response. Revision of the court decision, you need to wait three months. If, after this time, they decide that the homemade design of an air rifle is o-o-very dangerous for publication, then, to my deep regret, you will continue to read these lines.

In the meantime, dear friends, you can take an interest in other designs of cold and cold throwing weapons by clicking on the links below, or by pointing the cursor at the corresponding button at the top left.

Similar articles: