Do I need a license for a dental laboratory? Rules for obtaining a license for a dental laboratory

In accordance with clause 5 of Appendix No. 1 to the Procedure for providing medical care for the adult population with dental diseases, approved. By order of the Ministry of Health and Social Development of the Russian Federation of December 7, 2011 No. 1496n, a dental laboratory can be a structural unit dental clinic or another medical organization providing primary health care on an outpatient basis (see Appendix No. 2 to the mentioned Procedure). However, in practice, a dental laboratory can and often does exist as a separate medical organization.

As follows from paragraph 11 of Appendix No. 2, the function dental laboratory- production of dentures, maxillofacial prostheses and orthodontic devices.

Thus, based on the above provisions, we can conclude that a dental laboratory is a type of dental medical organization that is subject to SanPiN 2.1.3.2630-10 “Sanitary and epidemiological requirements for organizations carrying out medical activities", approved. Resolution Federal service on supervision in the field of protection of consumer rights and human well-being dated May 18, 2010 No. 58 (hereinafter referred to as SanPiN 2.1.3.2630-10) and, in particular, the effect of Chapter 5 “Sanitary and hygienic requirements for dental medical organizations.” Below we consider some special requirements for the placement of a dental laboratory.

When choosing premises for a dental laboratory, you should take into account the type of proposed work. So, in paragraph 5.16. Ch. 5 SanPiN 2.1.3.2630-10 states that dental laboratories for 1 or 2 workplaces, in which work is performed that is not accompanied by the release of harmful substances (for example: applying and firing ceramic mass, turning and other work), is allowed to be located in residential and public buildings, from which it follows that if work is carried out in a dental laboratory that is accompanied by the release of harmful substances, then such a laboratory cannot be located in a residential or public building. Work accompanied by the release of harmful substances includes work with precursors of narcotic drugs and psychotropic substances (for example, methyl acrylate and methyl methacrylate), which are often used in dental technology.

By general rule the set of premises of a dental laboratory is determined by the capacity of the medical organization in which the laboratory is created, or by the types of work that are planned to be performed in it, if the dental laboratory is an independent medical organization.

Conventionally, all rooms of a dental laboratory can be divided into 2 groups: main rooms, which include dental technicians’ offices, and specialized rooms, which include polymerization, plaster, polishing, soldering and foundry rooms.

Table 1 below shows the minimum floor space dimensions for a dental laboratory and provides some notes that you should pay particular attention to.

Table 1.
Minimum dimensions of dental laboratory areas

Name of the premises	Minimum area, sq.m.	Note
Dental laboratory: room for dental technicians	7	4 sq.m. per technician, but no more than 10 technicians in one room
Specialized rooms: polymerization, plaster, polishing, soldering	7	If there is a dental laboratory for 1-2 full-time dental technicians, it can be located in two rooms - in one of the rooms the processes of plaster casting, polishing, polymerization, and soldering are combined, in the other - workplace dental technician. In this case, the area of ​​both offices must be at least 14 sq.m.
Foundry	4	Depending on the technology and dimensions of the equipment, the area can be changed

In section 3 ch. 5 SanPiN 2.1.3.2630-10 fixed following rules that must be observed when decorating the premises of a dental laboratory:

• The walls of the main premises of the dental laboratory are painted or lined with panels having a smooth surface; The seams are hermetically sealed.
• The ceilings of dental laboratories are painted with water-based or other paints. It is possible to use suspended ceilings if this does not affect the standard height of the room. Suspended ceilings in this case should be made of slabs (panels) having a smooth, non-perforated surface that is resistant to the action of detergents and disinfectants.
• Floors must have a smooth surface made of materials approved for these purposes.
• The color of wall and floor surfaces in dental laboratories should be neutral, light tones that do not interfere with the correct color discrimination of mucous membranes, skin, blood, teeth (natural and artificial), filling and denture materials.
• If mercury amalgam is used in a dental laboratory, then:
  • the walls and ceilings of these rooms must be smooth, without cracks or decorations; plastered (brick) or rubbed (panel) with the addition of 5% sulfur powder to bind mercury vapor into a durable compound (mercury sulfide) and painted with paints approved for dental offices;
  • floors must be laid with rolled material, all seams must be welded, the baseboard must fit tightly to the walls and floor;
  • tables for working with amalgam must be covered with mercury-proof material and have edges along the edges; there should be no open drawers under the working surface of the tables; It is allowed to use only amalgam produced in hermetically sealed capsules.

The dental laboratory houses equipment, the list of which is given in the Order of the Ministry of Health and Social Development of the Russian Federation dated December 7, 2011 No. 1496n in the section “Standards for equipping the dental (dental) laboratory of a dental clinic” and in the Order of the Ministry of Health of Russia dated November 13, 2012 No. 910n (as amended on August 3. 2015) in the section “Standard for equipping an orthodontic dental laboratory.”

SanPiN 2.1.3.2630-10 does not contain any special requirements for the placement of equipment in premises, with the exception of the following:

• In the premises of dental laboratories where work with gypsum is carried out, equipment must be installed for sedimentation of gypsum from wastewater before being discharged into the sewer (gypsum traps, etc.).
• The location of dental technicians' desks in the main rooms of the dental laboratory should ensure left-side natural lighting of the workplace.

Follow us

By submitting an application, you agree to the terms of processing and use of personal data.

First of all, it should be noted that according to the rules of Ch. 5 SanPiN 2.1.3.2630-10 for production premises of dental laboratories must be provided autonomous systems ventilation.

Depending on the technological part of the project, dental laboratories also provide local suction from the workplaces of dental technicians, grinding motors, in the foundry above the furnace, in the soldering room, above heating devices and work tables in the polymerization room. Working with harmful chemicals(cytostatics, psychotropic drugs, chemical reagents) are similarly permitted provided that local exhaust devices are used. At the same time, the technological equipment of dental laboratories, which includes sections for cleaning the exhaust air from this equipment, as well as closed-circuit equipment, does not require additional local suction.

In the premises of dental laboratories, local suction and general exhaust ventilation may be combined into one exhaust system within the laboratory premises or in the ventilation chamber. It is allowed to install a general exchange supply ventilation for laboratory premises and other premises of a dental medical organization, while the supply of fresh air to the laboratory premises should be provided through a separate air duct passing from the ventilation chamber, with a check valve installed on it within the ventilation chamber. The air released into the atmosphere should be purified in accordance with the technological characteristics of the equipment and materials.

In dental laboratories with 1 or 2 workstations, in which work is performed that is not accompanied by the release of harmful substances (for example: applying and firing ceramic mass, turning and other work), unorganized air exchange in the room is allowed by ventilation through transoms or using natural exhaust ventilation with 2-fold air exchange through an autonomous ventilation duct with access to the roof or outer wall without light openings.

According to the requirements of SanPiN 2.1.3.2630-10, all premises of dental laboratories (permanent workplaces) must have natural lighting, the coefficient of which must comply with the hygienic requirements established by current sanitary standards.

When designing a dental laboratory, it should be borne in mind that, if possible, it is recommended to orient the main premises and foundries of the dental laboratory to the northern directions to prevent overheating of the premises in the summer. In existing dental medical organizations that have window orientations that do not correspond to the direction indicated above, you can resort to the use of sun protection devices (visors, sun protection films, blinds).

As a general rule, all premises of dental medical organizations must have general artificial lighting. For fluorescent lighting in the main rooms of a dental laboratory, lamps with an emission spectrum that does not distort color rendition are recommended. In this case, general lighting lamps should be placed so as not to fall into the field of view of the working doctor.

In addition to general lighting, polishing rooms in a dental laboratory must also have local lighting. Local lighting can be in the form of:

• dental lamps on dental units;
• special (preferably shadowless) reflectors for each surgeon’s workplace;
• shadowless reflectors in operating rooms;
• lamps at each dental technician’s workplace in the main and polishing rooms.

The level of illumination from local sources should not exceed the level of general illumination by more than 10 times.

All lamps, both local and general lighting, must have appropriate protective fittings that provide for their wet cleaning and protect the personnel’s eyes from the glare of the lamps.

Nota bene! The Faculty of Medical Law reminds that the location of dental technicians’ desks in the main premises of the dental laboratory should ensure left-side natural lighting of the workplace.

And finally, the qualification requirements for the position of a dental technician are approved by Order of the Ministry of Health of Russia dated February 10, 2016 No. 83n, namely: secondary medical education in the specialty “Orthopedic Dentistry” and a specialist certificate in the specialty “Orthopedic Dentistry”.

Practical significance

The criteria for locating a dental laboratory presented in this article are relevant primarily for obtaining a sanitary-epidemiological certificate (SEZ) from Rospotrebnadzor. Read more about this procedure in the “” section. However, obtaining a free economic zone is not the only condition for carrying out medical activities. The second important step on the path to opening a dental laboratory is obtaining a license. Information on the issue of licensing medical activities is presented in the “” section.

DO YOU NEED OR NOT A LICENSE TO MANUFACTURE DENTAL PROSTHESES?

The answer to this question is not at all obvious, as it might seem at first glance.

Turning to the legislation “On licensing of certain types of activities” Federal Law dated 04.05.2011 N 99-FZ, we find out that licensing of medical activities is regulated by the said law (Part 5, Article 1 99-FZ), and since the activities of dental technicians is medical, then the organizations in which they work are subject to licensing.
But there is another opinion that “A license to make dentures is not needed.”
Let us analyze the existing legislation concerning the manufacture of dentures in the field of medicine, production and the work of dental technicians.

Current All-Russian Classifier of Species economic activity(OKVED-2) (approved By Order of Rosstandart dated January 31, 2014 N 14-st) (as amended on February 20, 2019) The “Dental practice” grouping (86.23) includes:
- activities in the field of dentistry, general or specialized, for example in the field of dentistry, endodontic and pediatric dentistry, oral pathology;
- activities in the field of orthodontics

This group does not include: . A separate OKVED code is provided for this: 32.50

Thus, OKVED 32.50 considers the manufacture dental and orthodontic prostheses not as medicine or dental services, but as “Manufacture of medical instruments and equipment.”
OKVED 32.50: Production of medical instruments and equipment.
This grouping includes:
- production of laboratory equipment, surgical and medical instruments, surgical instruments and spare parts, dental equipment and consumables, orthodontic products, dental and orthodontic prostheses

According to the All-Russian Product Classification OK 005-93, prosthetic and orthopedic products are included in the product group medical purposes. Consequently, the manufactured prosthetic and orthopedic products and their parts are classified as medical products - code 93 0000.

In addition, the Law (99-FZ) establishes a requirement for obtaining a license for the production of medical equipment - code 94 0000, to which these medical devices do not belong. A dental technician does not produce medical equipment. It produces dentures - medical products.

At the same time, there is Order of the Ministry of Health of Russia dated 06/06/2012 N 4n “On approval of the nomenclature classification medical products"which distinguishes: group 15 "Dental medical products" and subgroups: 15.16 "Dental prostheses and related products" and 15.17 "Dental prostheses and related products."

Thus, the legislator is aware of the existence of such medical products as: “Dental medical products” and “Dental dentures”.

In this case, they seem to be subject to state registration of medical devices.
But the State Registration Procedure approved by Government Decree Russian Federation dated December 27, 2012 No. 1416 “On approval of the Rules for state registration of medical devices” indicates that “Medical products, custom-made for patients, which have special requirements for their intended purpose medical workers and which are intended solely for the personal use of the individual patient, are not subject to state registration.“Thus, the legislator does not require state registration of activities for the manufacture of dentures.
The above suggests that a dental technician does not require a license to manufacture dentures. It's not entirely clear.

There are options when a license is needed and when it is not.
Let's look at both. And both of them are correct.

Option 1: IF the production of dentures is carried out by dental technicians.
In the Nomenclature of Specialties of Specialists with Secondary Medical and Pharmaceutical Education in the Healthcare Sphere of the Russian Federation “Order of the Ministry of Health and Social Development of the Russian Federation dated April 16, 2008 N 176n”, “Orthopedic Dentistry” is indicated.
"OK 010-2014 (MSKZ-08). The All-Russian Classifier of Occupations” highlights occupation No. 3214 “Dental technicians and prosthetic technicians.” Dental and prosthetic technicians can make dentures, crowns and bridges. Their responsibilities include: including: - production of complete and partial dentures, mouth guards, crowns, metal clamps, inlays, bridges and other devices;

The duties of a Dental Technician include: Production of artificial crowns, including metal-ceramics, simple designs of post teeth, designs of bridges, removable plate and clasp dentures, orthodontic and maxillofacial structures. (Order of the Ministry of Health and Social Development of the Russian Federation dated July 23, 2010 N 541n “On approval of the Unified Qualification Directory for positions of managers, specialists and employees, section “Qualification characteristics of positions of workers in the field of healthcare”). In order to take up the position of Dental Technician, you need to have a Secondary vocational education in the specialty “Orthopedic Dentistry” (Order of the Ministry of Health of Russia dated 02/10/2016 N 83n “On approval of qualification requirements for medical and pharmaceutical workers with secondary medical and pharmaceutical education”).

Until April 30, 2012, Decree of the Government of the Russian Federation of January 22, 2007 N 30 “On approval of the Regulations on licensing of medical activities” was in force, which detailed that the list includes services performed in the implementation of pre-medical, outpatient, inpatient, emergency and emergency specialized, high-tech , sanatorium-resort medical care.
In the current Decree of the Government of the Russian Federation of April 16, 2012 N 291 “On licensing of medical activities” there is no detail regarding pre-medical medical care.
This is due to the fact that Art. 33 of the Federal Law 323 “On the fundamentals of protecting the health of citizens in the Russian Federation”, which entered into force on January 1, 2012, considers primary pre-medical health care as part of primary health care, which is accordingly subject to licensing. In accordance with Decree of the Government of the Russian Federation N 291, orthopedic dentistry is subject to licensing, including when providing pre-medical care.
Organizations that manufacture dentures using dental technicians must obtain a license. Dental technicians with secondary vocational education and a valid certificate in the specialty “Orthopedic Dentistry” can be hired for a position in such an organization. The organization is considered medical.

Option 2: IF the production of dentures is carried out NOT by a dental technician, but by a specialist in the field of computer technology and production.

Let's imagine a workshop for the production of artificial teeth for removable denture sets. Or a factory for the production of orthodontic trainers. Or a company that produces mouth guards (aligners) to correct your bite.
Or a production machine shop with dozens of milling machines that sharpen titanium abutments, clasps, titanium bases day and night...

In another workshop, models, spoons, aligners, temporary crowns are printed on 3D printers...

In the third room there are staff - exclusively computer modeling specialists who have nothing to do with medicine. They receive STL files for modeling from doctors and clinics. And they work with them programmatically.
They are really good at working with 3D graphics. And it makes no difference to them what to model and send for printing or milling: a set of toy soldiers or dentures modeled in a CAD program.
And so they calmly model their prosthetics, saw, and print.
They work officially under contracts, receive payment by bank transfer, pay salaries, funds and taxes.
Tell me, does this description sound like a dental laboratory? Not particularly, really. In reality it looks more like a factory.

Do they have the right to manufacture medical products at the factory in this way? Certainly! Why? For the reasons that we discussed above - Order of the Ministry of Health of Russia dated 06.06.2012 N 4n “On approval of the nomenclature classification of medical products” which distinguishes: group 15 “Dental medical products” and subgroups: 15.16 “Dental dentures and related products” and 15.17 “Prosthetics dental and related products" distinguishes them as an independent product of production.

IMPORTANT! Please note - this is not the nomenclature of medical SERVICES by order of the Ministry of Health of the Russian Federation 804n, but the nomenclature of medical DEVICES by order of the Ministry of Health of the Russian Federation No. 4n!

And the manufacture of such products is not included in the list of activities for which a license is required. Does not require medical education from the manufacturer as mandatory.
And therefore, those who make them in the second version are not medical workers and do not provide medical services, as is the case when a dental technician performs the SAME work with medical education. They are anyone - a 3D designer, a CNC machine programmer, a printer maintenance worker...
And it doesn’t have to be a huge factory for the production of medical devices. And a simple small laboratory can be designed like this, the main thing is to know how to do it correctly.

Main conclusions:
1. A dental technician is a HEALTH WORKER. Therefore, the manufacture of medical products in the form of dentures by his own hands is considered a medical activity, and the products are classified by order of the Ministry of Health of the Russian Federation as a “Medical Service.”
2. Code 32.50, 33.10.1 and other production codes are NOT SUITABLE for dental technicians. He has the right to work only as a medical worker under the medical OKVED.
3. To make dentures as a profession "Dental Technician" it is indeed REQUIRED to obtain a medical license for ZTL. The activities of a dental laboratory in the Russian Federation are subject to licensing as medical. Definitely so.
4. The manufacture of dentures may not be medicine, but manufacturing. The key difference is the design of ALL business processes as production. And the use of the labor of employees who are not registered as health workers (a dental technician is a health worker, don’t forget!).
5. If the manufacture of dentures is formalized specifically as a production, then you need to be able to create and actually defend to the inspectors a large package of documentation that distinguishes this production from medicine and a dental laboratory.
6. If during the inspection you are unable to document that you are not engaged in medical activities (and the line is very thin and only very competent specialists in medicine and law can actually translate this into documents), then you will be charged with carrying out activities without a license with everyone the resulting legal consequences. Which dental technicians for some reason prefer not to know about. But if you are caught and accused, this is what will happen:

Administrative punishment:
Code of Administrative Offenses of the Russian Federation
Article 14.1. Implementation entrepreneurial activity without state registration or without special permission (license)

Punishment:
2. Carrying out business activities without a special permit (license), if such a permit (such license) is mandatory (mandatory),
entails the imposition of an administrative fine
- on citizens in the amount of two thousand to two thousand five hundred rubles with or without confiscation of manufactured products, production tools and raw materials;
- for officials - from four thousand to five thousand rubles with or without confiscation of manufactured products, production tools and raw materials;
- on legal entities- from forty thousand to fifty thousand rubles with or without confiscation of manufactured products, production tools and raw materials.

It would seem - well, even if we get caught, well, we’ll pay a fine and that’s it. But read this carefully: "... with confiscation of manufactured products, production tools and raw materials or without it."

If we talk human language- everything you work with is confiscated - a furnace for pressing ceramics, a foundry, all brushes and masses, a dental motor, etc. The measure is clear - to prevent relapse, so that after paying the fine you will not continue to violate.
So calculate how much it will cost.

Do you think that's all? You are wrong!

There is also a CRIMINAL penalty for this. And even its own special article:
Criminal Code of the Russian Federation, Article 235.1. Illegal production medicines and medical devices(introduced by Federal Law dated December 31, 2014 N 532-FZ)

1. Production of medicines or medical products without special permission (license), if such permission (such license) is mandatory (mandatory), -
punished imprisonment for a term of three to five years with a fine in the amount of five hundred thousand to two million rubles or in the amount of wages or other income of the convicted person for a period of six months to two years or without it.
2. The same acts committed:
a) an organized group;
b) on a large scale, -
are punished imprisonment for a term of five to eight years with a fine of one million to three million rubles or in the amount of wages or other income of the convicted person for a period of one to three years or without it.
Note. Large size This article recognizes the cost of medicines or medical devices exceeding one hundred thousand rubles

So, have you read it?
Now realize:
1. Working without a license is not only an administrative, but also a CRIMINAL crime
2. Punishment simply for being caught - from 3 to 5 years in prison + a fine of up to 2,000,000 rubles.
3. If the investigation proves that you worked in a group like this in the laboratory (and this is two or more people) - a term of 5 to 8 years in prison and a fine of up to 3,000,000 rubles.
4. If you work completely alone as an individual entrepreneur, but the investigation has proven that you receive income from such work in the form of a large amount ( In this article, a large amount is recognized as the cost of medicines or medical devices exceeding 100,000 (One hundred thousand rubles. ) - receive from - term from 3 to 5 years in prison + a fine of up to 2,000,000 rubles.
Cool? They earned only a stolnik - they went to prison for 8 years, paid a criminal fine of 3 million, and on top of that, they confiscated all the dental equipment... How do you like the prospect?

Well, dear technicians, do you still want to continue working without a license without regard for knowledge of the laws and the help of professionals, proudly pointing at everyone with code 32.50 and considering this the main argument of defense? Then they will come for you sooner or later, it’s a matter of time.

There are no freebies or easy ways in our country. If you want to save on a license and avoid checks in medicine, you need to pay professionals for proper registration of your activities as a production. Don't do this yourself. Either get a medical license, or do production by those who understand this. Otherwise - see above...

The article uses materials from the website http://medyurist.pro from the publication of Kirill Gennadievich Redko in order to present a different, deeply substantiated opinion of the author of this article on the discussed issue of the need to license the production of medical dental products.

I want to create an individual entrepreneur. Please clarify the need for licensing OKVED code 33.10.1 - production of artificial teeth

Answer. Order of the Ministry of Health of the Russian Federation dated December 20, 2012 No. 1183n approved the nomenclature of positions for medical and pharmaceutical workers, including the position of a dental technician.

In addition, the Unified Qualification Directory for positions of managers, specialists and employees,

approved by order of the Ministry of Health and Social Development of Russia dated July 23, 2010 No. 541n, contains the job responsibilities of a dental technician: production various types artificial crowns, including metal-ceramics, simple designs of post teeth, various designs of bridges, removable plate and clasp dentures, orthodontic and maxillofacial structures. A dental technician prepares dental equipment and dental laboratory equipment for work, monitors their serviceability and correct operation. Renders first aid at emergency conditions. Must know: laws and other regulations legal acts Russian Federation in the field of healthcare; basics of medical dental care; organization of activities in a dental laboratory; characteristics of the main materials used in denture technology; manufacturing technology of dental maxillofacial prostheses and orthodontic devices; rules for the use of porcelain and metal-ceramics in denture technology; fundamentals of the functioning of budgetary insurance medicine and voluntary health insurance; basics of epidemiology; basics of valeology and sanology; basics of disaster medicine; basics of labor legislation; internal labor regulations; labor protection and fire safety rules.

Requirements for the qualifications of a dental technician: secondary vocational education in the specialty “Orthopedic Dentistry” and a specialist certificate in the specialty “Orthopedic Dentistry” without presenting requirements for work experience.

In addition, the procedures for providing medical care include the standard for equipping a dental technician’s office and the standard for equipping a dental (dental) laboratory of a dental clinic (Order of the Ministry of Health of Russia dated November 13, 2012 No. 910n “On approval of the procedure for providing medical care to children with disabilities.” dental diseases"and order of the Ministry of Health and Social Development of Russia dated December 7, 2011 No. 1496n "On approval of the procedure for providing medical care to the adult population for dental diseases").

According to Art. 37 Federal Law dated November 21, 2011 No. 323-FZ “On the fundamentals of protecting the health of citizens in the Russian Federation”, medical care is organized and provided in accordance with the procedures for providing medical care, mandatory for everyone on the territory of the Russian Federation medical organizations, as well as based on standards of care.

In accordance with the Appendix to the Regulations on licensing of medical activities (with the exception of the specified activities carried out by medical organizations and other organizations included in the private healthcare system on the territory of the Skolkovo Innovation Center), approved by the Decree of the Government of the Russian Federation dated April 16, 2012, work (service ), which constitutes medical activity, is subject to licensing in orthopedic dentistry.

Thus, if an individual entrepreneur (IP) performs job responsibilities dental technician for the production of various types of artificial crowns, including metal-ceramics, simple designs of pin teeth, various designs of bridges, removable plate and clasp dentures, orthodontic and maxillofacial structures, the individual entrepreneur must obtain a license to carry out medical activities in orthopedic dentistry from the licensing authority of the subject Russian Federation, on whose territory it is planned to be implemented.

Dentistry licensing

3. Conclude an agreement with us

2. Provide us with a copy of the floor plan and constituent documents

3. Conclude an agreement with us

4. We will do all the rest of the work for you!

Why should you contact us:

• 100% obtaining a license within 45 days
• visit of a specialist to the site for assessment and free consultations
• We carry out the entire cycle of work on a turnkey basis, ensuring European level service, performing your work with minimal time expenditure, without distracting you from your main activity
• We will not only develop the project, but also monitor it at all stages of implementation

7(495)970-14-90 ext 1400 or by writing email on

LICENSING OF MEDICAL ACTIVITIES

Today, the StomExpert Company provides a full range of services for obtaining a license for all types of medical activities.

Why should you contact us:

• 100% obtaining a license within 45 days
• visit of a specialist to the site for assessment and free consultations
• visit of a specialist to the site during an inspection by the licensing authority
• We carry out the entire cycle of work on a turnkey basis, providing a European level of service, performing our work with minimal time costs, without distracting you from your main activity
• We will not only develop the project, but also monitor it at all stages of implementation

With us you can do:

1. LICENSING OF DENTISTRY (INCLUDING X-RAY OFFICE)

The cost of a dental license (including an x-ray room) is from 100,000 to 200,000 rubles.

A license for medical activities is required if you open a small clinic (dental office) or dentistry (dental clinic) with a full range of services.

If you want to quickly enter the dental market, which is currently one of the most popular, promising and highly profitable, then you need to obtain a medical license for dental services as soon as possible.

Dentistry licensing the process is very labor-intensive and if you have to deal with the solution yourself this issue, the process of obtaining a license can take up to one year.

Our specialists will take care of visiting all the necessary authorities and the hassle of preparing the entire package of documents. We are the only ones who give 100% license receipt in 45 days.

Today, modern dental clinic cannot be done without the use of an X-ray machine. If you plan to use an X-ray machine, then it is necessary to include in the licensing dental services include x-ray licensing. This procedure is very specific and this procedure units of companies are taken. As a result, the licensing process drags on for years.

How to obtain a dental license?

To obtain a license for dental activities enough:

1. Arrange a meeting in our office or at your site

2. Provide us with a copy of the floor plan and constituent documents

3. Conclude an agreement with us

4. We will do all the rest of the work for you!

A dental license is issued for an indefinite period!

2. LICENSING OF A DENTAL LABORATORY

The cost of licensing a dental laboratory starts from 50,000 rubles.

If you have an operating dental laboratory or are planning to open a dental laboratory, then having a medical license for a dental laboratory is prerequisite to run this business. A license for a dental laboratory is issued once and is currently unlimited.

To obtain a dental laboratory license, it is enough to:

1. Arrange a meeting in our office or at your site

2. Provide us with a copy of the floor plan and constituent documents

3. Conclude an agreement with us

4. We will do all the rest of the work for you!

License validity period: unlimited.

3. LICENSE FOR SERVICING MEDICAL EQUIPMENT

The cost of licensing for the maintenance of medical equipment is from 150,000 to 215,000 rubles.

To carry out repairs and maintenance of medical equipment, a medical license for maintenance (repair) of medical equipment is required. A medical license for servicing medical equipment is currently issued once and is unlimited.

Why should you contact us:

• 100% obtaining a license within 45 days
• visit of a specialist to the site for assessment and free consultations
• visit of a specialist to the site during inspection
• we provide everything necessary equipment
• We carry out the entire cycle of work on a turnkey basis, providing a European level of service, performing our work with minimal time costs, without distracting you from your main activity
• We will not only develop the project, but also monitor it at all stages of implementation
• more than 100 companies have already entrusted us with obtaining a license

7(495)970-14-90 or by writing an email to